Kvaser – CAN Interfaces, CANtoUSB, CAN Loggers, Lin Interfaces, various cables…

For more information:

Yaron Leizerowitch

yaron@sightsys.co.il

054-2584033

Kvaser Connects engineers to their CAN data in every industry

Kvaser’s advanced CAN bus solutions are used by engineers designing and deploying a variety of systems, from cars, trucks and buses, to industrial automation, avionics, marine, medical, military and more

USB to CAN interfaces

The Kvaser USBcan Light 2xHS is a compact, reliable and cost-effective means of connecting two high speed CAN busses to a PC or mobile computer. With a USB 2.0 compliant connector at one end and two 9-pin D-SUB connectors at the other, the Kvaser USBcan Light 2xHS is a fraction larger than the one-channel Leaf Light v2 but features the same sleek, ergonomically designed housing that Kvaser products have become renowned for and comes with galvanic isolation as standard.

 

Ethernet to CAN – Ethercan interfaces

The Kvaser Ethercan Light HS is a CAN to Ethernet interface that, when linked over the Internet to an Ethernet-equipped PC, allows CAN data to be remotely accessed from anywhere in the world. 

Ethercan makes it easy to implement the Internet of Things (IoT) concept by enabling data from any CAN product or system to be sent over a corporate network or the Cloud, using the standard Kvaser API. The Kvaser Ethercan device can be configured with a static IP and comes with an Ethercan Factory Reset Device to reset the configuration to factory default DHCP settings at the push of a button.

 

Wireless CAN Bridge – Kvaser Air Bridge Light HS

Kvaser Air Bridge Light HS is a configuration-free wireless CAN bridge that achieves predictable latency, without sacrificing stability or range. Comprising a preconfigured pair of plug-and-play units to rapidly exchange raw CAN data, the Kvaser Air Bridge Light HS is designed for environments or situations that make wired connection unsuitable or challenging e.g. between two moving parts that are connected by CAN.

There are two versions: Kvaser Air Bridge Light HS (FCC) (01008-6) complies with US certification, while Kvaser Air Bridge Light HS (00808-3) is approved for the European Union. Both share the same functionality but have different radio transmission schemes due to regulatory differences.

 

Software

Kvaser works with CAN bus software providers to offer a complete CAN solution. Combining Kvaser hardware with one of our Technical Associate’s software creates a powerful, tailored solution for your application and your market.

Kvaser interfaces and bus loggers can be used with the following analysis, debug and testing functions:

Bus Analysis – Monitor and analyze CAN messages on the bus.  Check error codes, bus speed, and more.

Calibration – Software and tools use to measure and fine tune CAN bus systems with precision.

CANopen – Software libraries and software specializing in the CANopen protocol, widely used in the Industrial Automation market and beyond.

Data Acquisition – Software for data management and analysis in real-time and post-measurement. Some packages include provision for gathering video, gps and data from other sensors.

Diagnostics – Tools for developing diagnostic functionality in any system, including ECUs. These include pre-generated diagnostic software components that will help developers and engineers to create reliable diagnostic functions and sequences that work throughout the test chain.

ECU Development – Development platforms that enable the design of automotive subsystems, up to entire ECU networks.

Protocol Stack – Software libraries for developing CANopen slave or master devices. Available in C-code and supporting a range of MCUs, these stacks are proven in the field

System Development – Software packages that aid in the development of high-quality systems for automation, automotive, and systems integration.

לפרטים נוספים אודות האפשרויות השונות בשימוש במוצרי Kvaser ואפליקציות התכנה המפורטות לעיל, אנא פנה אלינו ונשמח לייעץ

Compilers for C/C++Real Time Operating SystemsDebuggers & JTAG EmulatorsEmbedded Software Testing solutionsMiddleware & SW componentsHW Testing solutions – Boundary-Scan (JTAG) & FunctionalOrganizing, Analyzing & Verification tools for HDL designs, FPGAs, Board schematic, PCB layout and Systems designersHome of CANopen, EtherCAT, PowerLink, ProfiNet– SW Protocols, Data loggers, Interfaces, devices & SolutionsIn-Circuit/Parallel Engineering & Production Device Programmers (Flash/EPROMs/CPLDs…)

For more information: Yaron Leizerowitch yaron@sightsys.co.il 054-2584033